Benifits and Characteristics

• Low odour
• Will not alter coefficient of friction
• Slower drying;easy to work with
• Helps prevent permanent staining from oil and water penetration
• Blocks moisture penertaration that causes mildrew
• Preserves and protects without discoloration
• Resists uv degradation
• For use on porous and non porous surafces
• Allows treated surfaces to breathe

Product Description : Superior impregnator to help prevent oil and water based stains on all tile and masiry surfaces.For interior and exterior use.Specifically formulated for use on porcelain,but is excellent on granite,marble,sandstone,paversand terra cotta.

Directions for application and polished porcelain, marble, granite : Use as is.Test in obscure to determine suitability for the intended use.Surface should be clean,dry and free from any waxes,coatings grout residue or finishes.The use of sure-clean porcelain and stone cleaner is highly recommended for this purpose.Protect any painted or stained surfaces adjacent to the application area.Apply one good coat to the polished porcelain,marble.granite or other highly polished surface,with a lambs wool,mop,roller,brush or pump sprayer.Leave for a minimum of five hours for drying and deep penetration,then apply a second coat to the area.Buff treated area before second coat is dry.For small areas,use a soft rag.For larger jobs use a wool or white polishing pad with buffing machine.For optimum results,allow the treated surface to cure for 24 hours after buffing.

General Application Instructions for grout, Tile or Masonry Products : Use as is.Test in obscure area to determine suitability for the intended use.Surface should be clean,dry and free from any waxes,coatings or finishes.Protect any painted or stained surfaces adjascent to application area.Apply to surface in thin,even coat with a pump,airless sprayer,brush,rag,mop or roller.One coat is normally sufficient,but a second application is recommended on more porous surfaces or heavy walkway areas to ensure complete coverage.For optimum results,the treated area should be kept dry and free from soils for at least 24 hours.

Maintenance : To clean treated arears,simply use water and mild detergent.There is no need to use harsh cleaning agents such as abrasive powders,ammonia,acids or bleach.

Coverage : One litre will cover approximately 40m2  depending upon material to be treated and method of application.

Expected wear : Seal-Guard impregnator for porcelain and stone will last for many years with proper maintenance on all treated surfaces;however,heavy walkways areaes should be tested yearly abd product reapplied if necessary.