Sure-Clean Porcelain and Stone Cleaner was specifically developed to dissolve waxes and grout residue from the surface of porcelain tiles and other stone surfaces.  Because it contains no acid, it can be safely used on all highly polished and unpolished surfaces.  It is a surface preparation only and therefore, does not penetrate and weaken the masonry substrate as do powerful acids, nor is it capable of burning porcelain tile floors.

Most manufacturers ship their porcelain tiles with a coating to insure non-staining in transit.  The coating materials can vary from waxes to polystyrene packaging.  These coatings must be removed.  Our cleaner has been designed to clean and restore porcelain tiles in a single application.  Unlike cleaners containing acids, this product dissolves waxes and grout residue without harming the tile or grout.

It is safe and effective to use on any surfaces-wall and floor.  Sure-Clean Porcelain and Stone Cleaner is ready to use, and should not be diluted.  Simply apply to the surface, agitate and wipe off.

Benefits and Characteristics

• Contains no acids
• Easy to use and cost effective
• Removes virtually all surface contaminates
• Safe for use on all wall and floor surfaces
• Will not harm chrome fixtures
• Pleasant fragrance

Directions for Use

Application:-  Sweep, dust, mop or vacuum the area to be treated to remove dust, loose soil and debris.  Shake well.  FOR CLEANING SMALL AREAS:  Wet the area with a damp mop.  Apply Sure-Clean Porcelain & Stone Cleaner to floor area.  Agitate in a circular motion with a damp abrasive pad before it dries. Vigorously wipe over surface with a clean terrycloth towel.For cleaning large areas.Use of a mecchanical buffing machine is recommended.Wet the area with a damp mop.Apply sure-clean porcelain&stone cleaner to floor area and agitate the cleaner in a circular motion with a white or brown pad before it dries.A terry cloth or a clean white pad should be then used to buff and dry the surface.Remove dust bt vacuming then a  light wash is recommended to remove any excess or haze from the surface.Do not fan dry or force dry.

To seal the surface after cleaning.

We recommend the application of Seal-Guard impregnator for porcelain aand stone.Apply the first coat of seal-guard impregnator for porcelain and stone and allow to dry for a minium of 5 hours.Apply a second coat of seal-guard impregnator for porcelain and stone and buff off prior to second coat drying completely.On small areas,use a soft rag to buff.For larger areas,use a wool or white polishing pad with buffong machine.Consult label directions for more complete instructions.

Coverage.

25-50m2 per litre depending on the condition of the surface.method of applications,material to be treated and quanity and type of soiling.